PT. Infokom Internusa | Loop IP6763 TDM over Ethernet Aggregator
15977
single,single-product,postid-15977,woocommerce,woocommerce-page,ajax_fade,page_not_loaded,,side_menu_slide_from_right,columns-3,qode-theme-ver-9.1.2,wpb-js-composer js-comp-ver-4.12,vc_responsive

Products

11

Loop IP6763 TDM over Ethernet Aggregator

As the core communications network migrates from legacy TDM to IP/MPLS or Metro Ethernet to leverage CapEx and OpEx efficiently, the Loop-IP6763 TDMoEthernet Aggregator provides a cost-effective solution which allows operators to transport up to 32 E1/T1, 4 STM-1/OC-3 or 1 STM-4/OC-12* along with 4 Giga LAN traffic over existing IP/MPLS* or Metro Ethernet* network. The E1/T1 SCSI interface is fixed on main board while there are two hot-swappable tributary slots for STM-1/OC-3 or STM-4/OC-12* plug-in card types.

Loop-IP6763 TDMoEthernet Aggregator converts the TDM data stream and timing information from both PDH and SDH/SONET ports into packets and transmits to the connected IP/MPLS* or Metro Ethernet network via dual combo Gigabit Ethernet WAN ports with 802.3ad Link Aggregation capability. Another Pseudowire device converts the received packet stream back to original PDH and SDH/ SONET data stream along with the original timing information.

Loop-IP6763 TDMoEthernet Aggregator employs various Pseudowire Encapsulation protocols such as SAToP, SONET/SDH CEP*, CESoPSN, MEF-8*. To compensate the inherent Packet Delay Variation (PDV) of IP/MPLS* or Metro Ethernet network, Loop- IP6763 TDMoEthernet Aggregator utilizes Jitter Buffer Control and can compensate up to 512 ms with G.823/G.824 Traffic Interface conformance (+/- 1ppm).

 

Security is highly ensured via SSHv1/SSHv2 function and SNMPv1/v3 management.

Categories: ,

Watch Dragon ball super