Products
Home > SDH – SONET multiplexer ADM / TM – O9400R
SDH – SONET multiplexer ADM / TM – O9400R
The Loop-O9400R STM-1/4/16 (OC-3/12/48) is a standards-compliant high density SDH SONET ADM/TM multiplexer with a full T1/E1 cross-connect rack system.
With up to 4 STM-1/4/16 (OC-3/12/48) aggregate interfaces on cross-connect modules and 16 STM-1 (OC-3) interfaces on tributaries, the Loop-O9400R SDH multiplexer offers the service provider a versatile protection scheme including SNCP (UPSR), and MSP (1+1) protection for network topology.
All interfaces are fully compliant with the relevant ETSI standards and ITU recommendations. The Loop-O9400R SDH multiplexer provides powerful Operation, Administration, Maintenance and Provisioning (OAM&P) functionality, including fault management, performance monitoring, configuration management, and network security management. Through a console port, LAN port, In-band E1, and DCC channel, OAM&P can be achieved both locally and remotely via SNMP or menu-driven interfaces.
Description
Features
- 6U height, full front access (ETSI) shelf support up to 2.5G Mbps backplane
- Hot-swappable cross-connect modules, tributary modules and power modules
- Temperature-controlled fan tray
- Aggregate cross-connect modules (controller modules)
- Up to STM-1/4/16 (OC-3/12/48) aggregate lines with software configuration (CC16)
- Up to STM-1/4 (OC-3/12) aggregate lines with software configuration (CC4)
- Tributary modules: 8 tributary slots
- Two ports STM-1/4 (OC-3/12) module
- Three ports E3/T3 module
- 16/32/63 ports E1/T1 tributary module
- 8 GbE with L2 switch tributary module
- Power Modules
- DC module (-40 to -72 Vdc)
- AC/DC hybrid module (90 to 240 Vac; -40 to -72 Vdc)
- Dual power (1+ 1) protection
- Protection
- Controller cross-connect unit (CC16) protection,
- MSP (1+1), SNCP/UPSR Ring
- Controller cross-connect unit (CC4) protection,
- MSP (1+1), SNCP/UPSR
- Tributary protection
- E1/T1: Card, Port, Line
- E3/T3: Line
- B155/622: MSP, SNCP/UPSR
- Ethernet
- 8GE4SW: Card
- TM, ADM, and cross-connect SDH SONET Multiplexer
- Full cross-connect at VC11/VC12/VC3/VC4 levels
- External/Internal/Line timing source with SSM
- Ethernet supports GFP, LAPS, VCAT, BCP, LCAS and non-LCAS
- Management
- Console port, VT100 menu-driven
- SNMP port: Both v1 and v3 supported
- Telnet and SSH
- Centralized management with Loop’s EMS/iNMS over DCC channel
- Loop-iNET GUI Element Management System
- TMN management (Loop-iNMS) with full FCAPS and end-to-end circuit management
- RoHS compliant